No data in memory.  (For the EDM-700/800/760)

If you see: 1) The word 'DUMP' in PROGRAM mode, 2) Have flown the plane, and 3) No one has recently done a 'factory reset' on the EDM,  then you should have downloadable flight data in the EDM's memory. But if you see "NO DATA" being displayed on the EDM when trying to download - after meeting all the above three points - then the EDM has a faulty memory board and will need to be sent in for repair. Please call Technical Support at 800-345-4574 OR send an e-mail to: support@jpitech.com  for a RMA number before sending in.

** Note: The EDM-760 does not have RECRD in FAC LIM mode. Data logging is automatically set to the 'ON' position at the factory. You will see DUMP in the PROGRAM mode.