All EDM 700, 800, 900, 930 and FS 450 (Single and Twin) will receive flight
data from your GPS (this is a standard feature on the FS 450's and a standard feature which is included with the Fuel Flow option).
Fuel Required to Waypoint/
Destination (REQ)
Fuel Reserve (RES)
This parameter will be displayed only if
your EDM 700, 800, 900, 930 and FS 450 (Single and Twin) will receive flight
data from your GPS (this is a standard feature on the FS 450's and a standard feature which is included with the Fuel Flow option). This will tell you
how much fuel is required to get to the
next waypoint or destination programmed
on your GPS, based on your current fuel
flow rate and present position.
Fuel reserve when you arrive at your
next waypoint. This parameter will be displayed only if
your EDM 700, 800, 900, 930 and FS 450 (Single and Twin) will receive flight
data from your GPS (this is a standard feature on the FS 450's and a standard feature which is included with the Fuel Flow option).
This will tell you how much fuel reserve
you can expect when you arrive at your
next waypoint or destination programmed
on your GPS, at the current fuel flow
rate.
Distance per fuel units. Both the REQ
and the RES indicator lights on the FS 450 will be on
at the same time. It
will tell you your miles per fuel unit
such as miles per gallon, miles per
liter or miles per pound. It is based on
your current ground speed and current
fuel flow rate.
THE
EDM 760
Now even twin engine
aircraft owners can take
advantage of the legendary
EDM systems. With the EDM
760 the pilot can monitor
both engines simultaneously
on one 3 1/8th gage.
J.P. Instruments does not
charge their customers for any
software. Whether it is EzPlot,
EzConfig or EzTrends , JPI will not
charge you a penny for downloading
and using this software. It's FREE
!!!
